i-Clean POWDER FREE LATEX GLOVE
PRODUCT SPECIFICATION
A latex glove is made from natural rubber latex and is a processed plant product. Latex gloves are the most flexible and resilient with a consistent fit. They are a great barrier protection against infection and contamination.
Specification:
1. Physical properties :
| Parameters | CRG Standard |
ASTM Standard ASTM D3578-00a |
EN Standard EN 455 PART 1,2,3 or NF101, Rev. 7 |
JIS T9115/ ISO11193 |
|---|---|---|---|---|
| 1.1 Tensile strength | ||||
| 1.1.1 Before Ageing |
Min. 21 Mpa | Min. 18 Mpa | Median ≥ 9N | Min. 21 Mpa |
| 1.1.2 After Ageing |
Min. 16 Mpa | Min. 14 Mpa | Median ≥ 6N | Min. 16 Mpa |
| 1.2 Ultimate Elongation (Stress at 500%) | ||||
| 1.2.1 Before Aging | Min. 700% | Min. 650% | Min. 700% | Min. 700% |
| 1.2.2 After Aging | Min. 500% | Min. 500% | Min. 500% | Min. 500% |
2. Dimension :
| Parameters | CRG Standard |
ASTM Standard ASTM D3578-00a |
EN Standard EN 455 PART 1,2,3 or NF101, Rev. 7 |
JIS T9115/ ISO11193 |
|---|---|---|---|---|
| 2.1 Thickness | ||||
| 2.1.1 Finger | 0.16±0.03mm | Min. 0.08mm | Min. 0.08 | Min. 0.08 |
| 2.1.2 Palm | 0.13±0.03mm | Min. 0.08mm | Min. 0.08 | Min. 0.08 |
| 2.2 Width | 103±3mm | 111 ± 10mm | 110± 10mm | 110±10mm |
| 2.3 Length | Min. 240mm | Min. 220mm | Min. 240mm | Min. 230mm |
3. Sampling and Acceptance Levels
| Parameters | CRG Standard |
ASTM Standard ASTM D3578-00a |
EN Standard EN 455 PART 1,2,3 or NF101, Rev. 7 |
JIS T9115/ ISO11193 |
|---|---|---|---|---|
| 3.1 Holes | GI, AQL 1.5 | GI, AQL 2.5 | GI, AQL 1.5 | S4, AQL 2.5 |
| 3.2 Dimension | S2, AQL 4.0 | S2, AQL 4.0 | S2, AQL 4.0 | S2, AQL 4.0 |
| 3.3 Physical Properties | S2, AQL 4.0 | S2, AQL 4.0 | S2, AQL 4.0 | S2, AQL 4.0 |
| 3.4 Powder Content | S2, AQL 4.0 | N =2, N/A | – | – |
| 3.5 Protein Content | Each size 1 piece | N =3, N/A | – | N =3, N/A |
| 3.6 Visual Fault | ||||
| 3.6.1 Major | GI, AQL 1.5 | – | S2, AQL 2.5 | No existence of visual defects which may affect adversely the users. |
| 3.6.2 Minor | GI, AQL 2.5 | – | S2, AQL 4.0 |
4. Residual Powder
| Parameters | CRG Standard |
ASTM Standard ASTM D3578-00a |
EN Standard EN 455 PART 1,2,3 or NF101, Rev. 7 |
JIS T9115/ ISO11193 |
|---|---|---|---|---|
| 4.1 Material | U.S.P ADP Grade | – | – | – |
| 4.2 Powder Content | Max. 2mg/glove | Max. 2m/glove | – | – |
| 4.3 Testing Method | ASTM D6124-2000 | ASTM D6124-2000 | – | – |
| 5.0 Shelf Life/ Life time | 3 years | – | – | – |
5. Shelf Life/ Life Time
| Parameters | CRG Standard |
ASTM Standard ASTM D3578-00a |
EN Standard EN 455 PART 1,2,3 or NF101, Rev. 7 |
JIS T9115/ ISO11193 |
|---|---|---|---|---|
| 6.1 Protein Content Level | Max. 50ug/g | Recommended Max. 200ug/g |
– | Recommended Max. 200ug/g |
| 6.2 Testing Method | Follow either EN or ASTM Standard | ASTM D5712-99 | EN455/3 | ASTM D5712-99 or JIS T9010 (3.6) |
Get In Touch With Us
